Selecting Units of Measure
23
Year–to–date precipitation
Press RAINYR a third time to display the year–to–date precipitation record.
Yearly rain displays the precipitation accumulated since the 1st of the month
you’ve chosen as the beginning of your rain season in Setup Mode (See
“Screen 13: Rain Season” on page 17). Year–to–date precipitation is displayed
in inches (in) or millimeters (mm).
Daily Rain
Press RAINDAY to display the rain accumulated since 12 mid-
night. Any rain accumulated in the last 24 hours displays in the
ticker at the bottom of the screen.
Rain Storm
Rain Storm displays the rain total of the last rain event. It takes two tips of the
rain bucket to begin a storm event and 24 hours without rain to end a storm
event.
Press RAINDAY to toggle between the daily rain total and the Rain Storm
total. Rain accumulation may be displayed as either millimeters (mm) or
inches (in).
Solar Radiation
Press and release 2ND then press SOLAR to display the
current solar radiation reading. Solar radiation is displayed
as Watts per square meter (W/m
2
).
Current Evapotranspiration (ET)
Press and release 2ND then press ET to display the current
evapotranspiration reading.
Monthly Evapotranspiration (ET)
Press 2ND then press ET, then repeat the key sequence to display Monthly ET.
Yearly Evapotranspiration (ET)
Press 2ND then press ET, then repeat this key sequence two more times to dis-
play the ET reading since January 1st of the current year.
RAIN
DAY
N
W
NE
SE
SW
GRAPH
Vertical Scale: X10
WIND
RAIN YEAR
in
TEMP OUT
HUM IN
YEAR
HUM OUT
DAILY RAIN
in
TEMP IN
hPa
BAROMETER
STATION NO.1
F
F
F
MPH
Last 24 hrs
hr
Every 1
S
E
NW
pm
HEAT INDEX
ET
mm
ET
MO
mm
ET
YEAR
mm
SUN
W/m
2
To Next Page
Loading...
Need help?
General
