1
Integrated Sensor Suite with
Fan-Aspirated Radiation Shield
For Vantage Pro2™ and Vantage Pro2 Plus™
Installation Instructions Addendum
The Vantage Pro2™ Integrated Sensor Suite
(ISS) with the Fan-Aspirated Radiation Shield
uses a combination of fan-aspiration and
shielding to minimize temperature measurement
errors due to the effects of solar radiation.
Fan-Aspirated ISS Addendum
Overview
This addendum provides additional information
specific to the installation and use of ISS models
containing the fan-aspirated radiation shield
only, and is intended to be used in conjunction with the “Integrated Sensor
Suite Installation Manual.”
The table below shows the location of the information required to install
and maintain your Fan-Aspirated ISS system.
Section/Procedure
In This
Addendum
In the ISS
Installation
Manual
Tools for Setup X
Preparing the Anemometer X
Preparing the Rain Collector XX
Preparing the Radiation Shield X
Powering ISS and Testing Communications X
Powering and Testing the Fan X
Choosing a Site for the ISS X
Mounting the ISS X
Additional Mounting Options X
Fan-Aspirated ISS Maintenance X
Theory of Operation X
Fan-Aspirated ISS Troubleshooting X
Fan-Aspirated ISS Specifications X
To Next Page
Need help?
General
