11
Operation
To control the washing machine is in working state
or waiting state.
After select program and water level, press this button to start.
Press this button to pause during working, press again will rework.
Digital timer displays program code
If select AIR DRY, the digital timer displays air dry time, unit is MIN.
When washing, the digital timer shows the rest time of washing, unit is MIN.
When trouble encountered, the digital time shows trouble code.
At the beginning of start, press " WATER LEVEL" to set water level, the digital timer
displays from "1" to "10", it is water level 1 to water level 10. At the status,
the water level
is
"7", 1-2 is less water level, 3-4 is low water level, 5-8 is middle water level, 9-10 is high
water level
During wash (including rinse), if need to add water, press "WATER LEVEL" button to add
water, un-press will stop adding, or PAUSE the washing machine and press " WATER
LEVEL" to select higher water level, then press "START/PAUSE" button. The washing
machine will add the water to setting level automatically and continue working. If your
resetting water level is lower than present water level, the lower water level will valid in
next water inlet.
Automatically add water: During WASH and RINSE process, if the washing machine
check the water level is lower than setting water level. The washing machine will pause
and add water to setting water level automatically.
End(min) End(min)
11
To Next Page
Loading...
