85
Issued: 28.02.2005
Strider MD 4 Plus
The nameplate is located on the metal sheet
between the batteries and contains the
following information:
• Model number
• Data manufacture (month/year)
• Manufacturer
• Serial number
• Maximum speed
• User weight
If you are not intending to use your Strider
for longer periods (e.g. over the winter, you
should prepare it as follows:
Remove soiling and dust.
Charge the batteries completely.
Check the tyre pressure and adjust if
necessary.
Place the Strider on supports. Lift the
Strider high enough so that the tyres are
no longer touching the floor.
➨
➨
➨
➨
Care during storage:
Recharge the batteries once a month
(see chapter 10.0).
➨
Front support,
Rear support
Temporary storage
Nameplate
18.0Temporary storage
19.0Appendix
19.1 Nameplate
To Next Page
Loading...
