EasyManua.ls Logo

DaytonAudio IOSUB - Product Features; Parts Inventory; Recommended Installation Tools; Subwoofer Location

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Thank you for purchasing the Dayton Audio IOSUB Indoor/Outdoor Subwoofer. This subwoofer is the per-
fect choice for adding bass to an outdoor area such as a patio, pool, garden, and more. The IOSUB features
weather-resistant construction, high-quality components and exclusive acoustic tuning by Dayton Audio for
outstanding performance.
Features
Robust high excursion polypropylene woofer with stitched rubber surround
IP66 Weather-resistant composite enclosure
Please read these instructions completely before you begin your installation.
1. Parts Inventory
• IOSUB
Security eyebolt
Wire nuts x 2
Mounting screws x 2
• Manual
2. Recommended Installation Tools
#2 Phillips screwdriver
Wire cutters & wire stripper/crimp tool
Drill and bits
3. Subwoofer Location
The subwoofer res downward and is omnidirectional, its placement is less critical than full-range speak-
ers. For the best results, place the subwoofer near a wall and near the full-range speakers if possible. It
is recommended that the subwoofer be within 10-15 feet of the full-range speakers. It can also be placed
under a deck or behind bushes if you prefer a stealthy install.
4. Subwoofer Installation
Once you have selected the location for your subwoofer, you are ready to start the install. Run 12-14 gauge
2-conductor outdoor-rated speaker wire from your amplier to the location you have chosen for your sub-
woofer. It will need to be buried or suspended so make sure you mark where it is in the ground for future
reference. Your subwoofer is designed to sit at on all four of its legs. If mounting on a deck or patio it can
be fastened down by using the two key-hole slots in the bottom feet. To do this, simply measure the center
to center distance between the key-hole slots and install two mounting screws into the deck or patio, leaving
¼" of the screw exposed. Place the subwoofer feet on the screws and rotate clockwise until the subwoofer
is locked into the screw heads. For installation in a garden or ower bed, place the subwoofer on a at level
surface. It is recommended to place the subwoofer on pavers to prevent debris, mulch and weeds from gath-
ering under the subwoofer as foreign objects can cause poor performance and could damage the subwoofer.
Note: For anti-theft security and permanent placement,
the IOSUB has a built-in eyebolt that enables you to
anchor it to its location.

Related product manuals