37
KL SERIES Code 420120347 REV. 1.0
Controls:
Peak power:
Bluetooth® Control (level/pair), CH1/CH2 level, Master level,
Preset, Link-Mix
400 W (KL10) / 800 W (KL12-KL15)
PROCESSOR
INPUTS & OUTPUTS
Internal controller:
Inputs:
Outputs:
A/D D/A converter:
28-bit/56-bit DSP
1 x Combo (XLR/Jack), 1 x (TRS or XLR), 1 x Bluetooth®
48 kHz
1x XLR link OUT
Peak, RMS, Limiter
English
Limiter:
Power supply:
1 x VDE
USER INTERFACE
Absorption at 1/8th of power in
medium use conditions (*):
0.45 A (230 V) - 0.75 A (115 V) [KL10] /
Absorption at 1/3rd of power in
maximum use conditions (**):
1.1 A (230 V) - 1.7 A (115 V) [KL10] /
1.4 A (230 V) - 2.7 A (115 V) [KL12-KL15]
Absorption with speaker on in
no-signal condition (idle):
22.5 W
Inrush current:
14.07 A
POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of conguration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
To Next Page
Loading...
