INSPECTION and
INSTALLATION
Your
unit was
carefully packed at the factory in a
protective carton. Nonetheless,
be sure to
examine the unit and the
carton for any signs
of damage that may have
occurred
during shipping.
If there is such evidence,
don't destroy the carton or packing
material, and
notify
your
dealer immediately.
It's a
good idea in any case to save
the carton and packing
should
you
ever need to
ship the unit.
In the event
of initial problems, first contact your
dealer; your unit was thoroughly
inspected and tested at
the factory.
In addition to a model 166 and
this owner's manual, the carton should
contain a war-
ranty/registration
card. Please fill it out and send it to us.
The chassis
has integral brackets (rack "eau-s")
for mounting into a standard equip-
ment rack
(19"
or 48.3 cm wide).
No special cooling or ventilation is
required in any
installation; other
components may be stacked above or
below the unit provided they
don't
generate excessive heat.
WARNING
TO PREVENT FIRE OR
SHOCK HAZARD,
DO
NOT EXPOSE THIS COMPONENT
TO RAIN OR
MOISTURE.
This triangle,
which appears on your
component, alerts you to
the presence
of uninsulated
dangerous voltage inside
the enclosure
—
voltage
that may
be
sufficient
to
constitute a risk of shock.
This triangle
also appears on your
component, and
it
alerts
you to important
operating
and maintenance instruc-
tions in this
accompanying
literature.
CAUTION
To Reduce
Further
the
Risk
of Shock, Do Not Remove
the
Cover
or
Back. There Are
No User-Serviceable Parts
Inside;
Refer All Servicing
to Qualified
Personnel.
"dbx," "OverEasy," and
"PeakStop" are all registered trademarks of
dbx
Professional Products. San Leandro
CA.
To Next Page
Loading...
