Need help?Do you have a question about the dbx 266xs and is the answer not in the manual?
General| Type | Compressor/Gate |
|---|---|
| Number of Channels | 2 |
| Dynamic Range | > 114 dB, unweighted |
| Input Connectors | XLR and 1/4" TRS |
| Input Type | Electronically balanced/unbalanced, RF filtered |
| Output Connectors | XLR and 1/4" TRS |
| Output Type | Electronically balanced/unbalanced, RF filtered |
| IMD | <0.1% SMPTE |
| CMRR | > 40 dB, typically > 55 dB at 1 kHz |
| Compressor Threshold Range | -40 dBu to +20 dBu |
| Compressor Ratio | 1:1 to Infinity:1 |
| Controls | Threshold, Ratio, Attack, Release, Output |
| Frequency Response | 20Hz - 20kHz |
| Maximum Input Level | +22dBu |
| Maximum Output Level | +21 dBu balanced/unbalanced |
| Dimensions | 1.75" x 5.75" x 19" |
| Weight | 5.5 lbs |
| Side Chain Insert | 1/4" TRS |
| Noise | <-90dBu |
| THD+N | <0.1% @ +4dBu, 1kHz |
| Crosstalk | <-80dB, 20Hz - 20kHz |
| Interchannel Crosstalk | <-80dB, 20Hz - 20kHz |
| Power Consumption | 15W |
| Operating Voltage | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Expander/Gate Threshold Range | +10dB |
| Expander/Gate Ratio | 1:1 |
| Expander/Gate Release Time | 50ms to 2s |
| Expander/Gate Attack Time | 100 μs |
To Next Page
