Need help?Do you have a question about the dbx 1066 and is the answer not in the manual?
General| Maximum Input Level | +24 dBu |
|---|---|
| Sidechain I/O | 1/4" TRS |
| Threshold | -40 dBu to +20 dBu |
| Ratio | 1:1 to ∞:1 |
| Signal to Noise Ratio | >90dB |
| Type | Compressor/Limiter |
| Frequency Response | 20Hz-20kHz |
| Maximum Output Level | +21 dBu |
| Dimensions | 19" W x 1.75" H x 7.5" D |
| Inputs | XLR and 1/4" TRS |
| Outputs | XLR and 1/4" TRS |
| Power Requirements | 100-240V AC, 50/60 Hz |
Covers water, power source, grounding, servicing, and UK plug warnings.
Information on EMC compliance and potential interference.
Guide on rack mounting, making audio connections, and applying power.
Explains the OverEasy® switch and its effect on the compression curve.
Details the PeakStopPlus Limiter threshold control.
Describes AC power, inputs, outputs, level switch, and sidechain connections.
Explains how to connect the 1066 using balanced and unbalanced cabling.
Technical parameters for the compressor and PeakStopPlus limiter functions.
To Next Page
