Need help?Do you have a question about the dbx 363X and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR, 1/4" TRS |
| Maximum Input Level | +22dBu |
| Maximum Output Level | +22dBu |
| Threshold | -40dBu to +20dBu |
| Compression Ratio | 1:1 to ∞:1 |
| Power Requirements | 100-240V AC, 50/60Hz |
Details the threshold setting and the LED indicating gate opening for each channel.
Explains controlling the gate with external signals via the key input.
Details setting the signal level for gate opening and the corresponding LED indicator.
Explains the hold time function to reduce false triggering and allow decay.
Describes the gate closing rate and its visual indicator LED.
Provides settings for gating snare drums or kick drums for tighter sound.
Offers settings for gating instruments with natural sustain like cymbals or pianos.
Step-by-step guide for installing a single 363X unit into a rack.
Instructions for mounting two 363X units adjacent to each other in a rack.
Information on unit reliability, repairs, and general troubleshooting advice.
Technical specifications for the unit's input impedance and levels.
Technical specifications for the unit's output impedance and levels.
Details on frequency response, distortion, dynamic range, and timing parameters.
Steps to verify the correct operation and voltage outputs of the power supply.
Procedures for testing the RMS symmetry of the audio channels.
To Next Page
