Need help?Do you have a question about the dbx 260 and is the answer not in the manual?
General| Type | Digital Signal Processor |
|---|---|
| Input Channels | 2 |
| Output Channels | 6 |
| Frequency Response | 20 Hz - 20 kHz, ±0.5 dB |
| Sample Rate | 48 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Input Connectors | XLR |
| Output Connectors | XLR |
| Maximum Input Level | +20 dBu |
| Maximum Output Level | +20 dBu |
| Control Interface | Front panel controls |
| Output Impedance | 120Ω balanced |
| Presets | 25 User, 25 Factory |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions | 19" |
| Crossover Slopes | 6, 12, 18, 24, 48 dB/Octave (Butterworth, Linkwitz-Riley, Bessel) |
Explains the core function and purpose of the DriveRack 260 as a complete signal processing unit.
Highlights the main capabilities and functionalities of the DriveRack 260.
Provides essential contact details for technical assistance and product service.
Outlines the terms, conditions, and duration of the product warranty.
Details all connectors, ports, and their functions on the rear panel of the unit.
Describes the front panel interface, including LCD display, meters, and buttons.
Offers a brief, step-by-step procedure for initial setup and connections.
Guides users through the initial system configuration process using the wizard.
Explains fundamental navigation methods, button functions, and the data wheel.
Describes the function of each button in the effect module selection array.
Details how to access and edit parameters in the Pre-EQ and Crossover modules.
Covers navigation for Dynamics, Delay, and various 'Other' insert modules.
Explains how to navigate the Wizard and Input/Output parameter sections.
Defines program structure and guides on using factory presets.
Guides on editing parameters within modules and saving program modifications.
Details the process of building personalized system configurations by selecting modules.
Instructions on how to save created configuration changes and load them.
Explains parameters for the 28-Band Graphic EQ and 9-Band Parametric EQ.
Details the Advanced Feedback Suppression (AFS) and Subharmonic Synthesizer modules.
Covers parameters for Gate, Automatic Gain Control, Notch Filters, and Crossover.
Explains parameters for Compressor, Limiter, Alignment Delay, and Input Routing.
Details output level adjustments, phase, and polarity compensation.
Adjusts LCD contrast and selects Auto EQ plot display type (RTA or GEQ).
Configures default startup behavior for programs and output mutes.
Guides on connecting, programming, and managing dbx Zone Controllers.
Details setting security levels for functions and creating user passwords.
Covers creating custom program lists and setting program change modes.
Explains how to access and interpret various metering displays for system monitoring.
Covers minimum system requirements and software installation steps.
Details setting up communication ports and preferences for DriveWare connection.
Explains how to use DriveWare for programming and controlling the DriveRack unit.
Introduces Zone Controllers and their remote control capabilities.
Illustrates wiring methods and programming procedures for Zone Controllers.
Provides hardware/software setup for a mono 4-way system with auxiliary zones.
Offers hardware and software setup guidance for a stereo tri-amplified system.
Details hardware/software setup for a stereo system with four auxiliary zones.
Provides setup for stereo bi-amp systems incorporating dual delay.
Explains how to perform soft and hard resets on the DriveRack 260.
Covers quick key functions for initial device startup and system lock.
Lists detailed technical specifications, including inputs, outputs, and performance.
Offers advice for maximizing performance when using the Auto EQ feature.
Includes block diagrams, input/output diagrams, and crossover configuration illustrations.
Details gain level jumpers and system setup for optimal gain structure.
To Next Page
