dbx 260 - Editing and Saving Program Changes

DriveRack
®
DriveRack® 260 User Manual
21
Configuration Functions
Section 3
Navigation Modes
Once you have selected a program with a configuration that accommodates your application, the DriveRack offers
instant access to edit effect types within the configuration.
To instantly access an effect module, simply press the corresponding button in the button array for the desired module.
3.3 Editing Factory Programs
Once you have reached the module that you wish to edit, use the PREV PG and NEXT PG buttons to move through
the pages within the module. The DATA wheel is used to edit parameter values. The following illustration shows an
example of the Compressor module in edit mode:
Note: The cursor indicates the currently selected parameter for editing. To select parameters to edit from the current
page, press the DATA wheel until the cursor is next to the parameter that you wish to edit.
M
1
3
5
2
4
6
M
A
B
STw/2Delays
33
FACT
Over Easy OFF
Compressor ON
COMP THR
-50 -30 -12 -5 0
LR
- 0+
<DATA> - SELECTS CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
PRESS <STORE> TO ADVANCE
NAME: ROCK VENUE
SR4725+sSub
INSERT:
PRESS <STORE> TO ADVANCE
STORE: Program 1
U6 SR4725+sSub
Replacing
PRESS <STORE> TO ADVANCE
STORE: ROCK VENUE
U1 DJ Setup
GEQ
P2x2
2x2
2x2
L
P L
P L
DD
D
CG
D
D
D
D
Replacing:
U 1 Program 1