40
Removing the sear burner for cleaning
Removing and cleaning the sear burner mesh
Sear burner cleaning
1 Ensure gas supply has been turned off and any
grill grates have been removed.
Lift the wire mesh up off the sear burner. Gently brush off any
soil or food residue from the mesh and c
heck for any insects and
insect nests.
For a deeper clean of the mesh, it can be rinsed in warm water
once removed from the burner.
Gently vacuum the sear burner to remove debris from the pores
.
Do not use a wire brush to clean the burner. Avoid submerging
the sear burner in water.
2
Grip the sear burner at the sides and lift up
at the rear so the burner is removed from its
mount. Slide the burner to the rear of the
product so that the air shutter head comes
off the brass orifice at the front. Lift burner
upwards at the front of the product to remove.
CARE AND MAINTENANCE
IMPORTANT!
When re-installing the sear burner after cleaning, ensure that it
is completely level and locked in place. This is needed to ensure
your grill provides an even cooking performance.
To Next Page
Loading...
Need help?
General
