5
3 PARTS SUPPLIED FOR INSTALLATION
4 UNPACKING AND HANDLING THE RANGE
Unpacking and handling
●
Inspect the product to verify that there is no shipping damage. If any damage is detected,
call the shipper and initiate a damage claim. DCS by Fisher & Paykel is not responsible for
shipping damage.
●
DO NOT discard any packing material (box, pallet, straps) until the unit has been
inspected.
●
Remove the outer carton and any packing material from the shipping base.
IMPORTANT!
●
DO NOT lift range by the oven door handles!
●
DO NOT remove the grill or griddle assemblies!
RGCV2 MODELS ONLY
IMPORTANT!
●
Before installing and using the range, be sure to remove any shipping spacers
from the oven, as shown below.
Shipping spacer
#10 x 2”
wood screws (4)
Anti-tip bracket (1) 5/16” x 1 1/2”
sleeve anchors (2)
Lag bolts and
washers (2)
To Next Page
Loading...
