DCS VARESE - Changing the System Language; Updating the System; Resetting to Factory Defaults; Viewing Device Information

Changing the system language
You can change the language of your system using dCS Mosaic ACTUS, for example, when
the system language is incorrect, or if you accidentally change the language to one you do
not understand.
1. On the home page of the app, select .
2. Select .
3. On the Settings screen, select System.
4. On the System screen, select Language.
5. From the list, select a system language.
Updating the system
By default, the system updates automatically, but you can also update it manually using dCS
Mosaic ACTUS.
1. On the home page of the app, select .
2. Select .
3. On the Settings screen, select System.
4. On the System screen, select System update.
5. Follow the instructions shown in dCS Mosaic ACTUS.
Resetting to factory defaults
CAUTION
A factory reset permanently erases all your data and settings.
Reset all system settings back to factory conditions.
1. On the home page of the app, select .
2. Select .
3. On the Settings screen, select System.
4. On the System screen, select Factory reset.
5. Follow the instructions.
Viewing device information
View information about dCS Mosaic ACTUS on your device, such as serial number, firmware
version, and network information.
1. On the home page of the app, select .
2. Select .
3. On the Settings screen, select About your Varèse.
4. On the About your Varèse screen, choose the information that you want to display:
Configuring Varèse
Varèse User Guide
19