DCS VARESE - Playing Music from Local Sources; Adjusting Music Volume

8
Using TIDALConnect
TIDALConnect allows TIDAL users to seamlessly play TIDAL content on a wide range of
hardware devices.
1. Open the TIDAL app.
2. Choose the playlist, album, or song that you wish to send to your Varèse Core.
3. Play a song.
4. Select Now Playing.
5. From the device selector, select your Varèse Core.
For more information, see tidal.com/connect.
Playing music from local sources
You can stream content from local sources, such as a music server on your network or USB
drives.
The music server must be UPnP (Universal Plug and Play) compatible, and must be
connected to the router using an Ethernet cable.
Adjusting music volume
Adjust the volume using dCS Mosaic ACTUS.
1. On the player bar or player screen, select .
2. On the Volume control screen:
• To increase the volume, swipe clockwise.
• To decrease the volume, swipe anti-clockwise.
• To mute the volume, select .
3. To close the Volume control screen, swipe down from the top of the screen.
Using the User Interface
1. On the User Interface front panel, select .
2. Adjust the volume:
• To increase the volume, swipe clockwise.
• To decrease the volume, swipe anti-clockwise.
• To mute the volume, select .
Using the Remote Control
• To increase the volume, turn the knob clockwise.
• To decrease the volume, turn the knob anti-clockwise.
Getting started
Varèse User Guide