DCS VARESE - Adjusting Signal Path Settings

The USB device type must be:
• A USB flash drive or low-powered USB hard drive, with the suggested
maximum size of 32GB.
• In FAT32 or unencrypted NTFS format.
Managing Digital I/O Module inputs
Manage your Digital I/O Module inputs using dCS Mosaic ACTUS.
1. On the home page of the app, select .
2. From the Select source drop-down, select Manage sources.
The Sources screen opens.
3. Select next to AUDIO INPUTS to open the list of Digital I/O Module inputs.
You can rename, hide, or reorder each Digital I/O Module input.
Adjusting signal path settings
You can use the signal path settings to change how music sounds, depending on the data
source and your personal preferences. You can adjust the following settings using dCS Mosaic
ACTUS:
• PCM and DSD filters
• Conversion modes
• Mappers
dCS Mosaic ACTUS also offers signal path presets - a bank of preconfigured settings.
Available
presets
Description
Measured This ensures the highest level of measured performance, as concluded by dCS
engineers.
PCM When listening to PCM, this preset is what dCS listening tests have shown to be
preferred settings.
DSD When listening to DSD, this preset is what dCS listening tests have shown to be
preferred settings.
PCM to DSD When converting PCM to DSD, this preset is what dCS listening tests have shown to
be preferred settings.
Custom When you adjust a preset bank, a custom preset is created.
Changing the PCM filter
Change how music sounds when listening to PCM data using dCS Mosaic ACTUS.
1. On the player screen of the app, select .
2. Select the PCM filter you want to apply.
Configuring Varèse
Varèse User Guide
15