Step 4. Cleaning the mixer
(I/J)
1 Remove the mixer tube (J).
2 Turn the bayonet catch counter clock
wise (approx. 10º) and pull the mixer
(I) parts towards you.
3 Rinse out all loose parts with hot
water.
4 Replace the mixer into the machine.
Assembling of the mixing system is
carried out in reversed order of the
disassembling.
5 Turn the topping outlet downwards.
Step 5. Cleaning the CoEx® brewer
1 Remove the brewer outlet: Press it
down and pull out the knob at the
right (see 5.1, step 4). Then remove
the left part by lifting it upwards.
2 Press the sides to split the two parts
of the brewer outlet (K).
3 Rinse the brewer outlet with hot
water while cleaning both parts,
inside and outside, with a brush.
4 Remove the CoEx® brewer (L): pull the
fixation handle upwards and pull the
brewer towards you at the same time.
5 Rinse out the CoEx® brewer with
warm water while cleaning it with
a brush.
6 Dry the CoEx® brewer and the
brewer outlet.
7 Replace the CoEx® brewer.
8 Assembling of the brewer outlet on
the CoEx® brewer is carried out in
reversed order.
Step 6. Take a test drink
9
(L)(K)
To Next Page