7.2 Messages you can solve yourself
Water tank needs filling
Close left door
Place cannister lid
Place waste container
Empty internal drip tray
No coffee in brewer
Not enough water in your cup
CoEx brewer not in position
No water connected
Install water tank
Filling pressure boiler
ERROR 1
Wait until the water tank is filled. In
hand fill mode: fill the water tank (P).
Close both doors.
The coffee cannister lid (E) is not placed
correctly, replace it.
Replace the waste container (M).
Empty and clean internal drip tray (N).
Fill the coffee canister(s), replace the
coffee funnel (H) and/or open the
canister lock.
Empty this cup, try again.
Empty it and retry the same selection.
Replace the CoEx brewer (L).
Open/connect the water connection
(see 1.3) and restart the machine.
Install the hand fill water tank (P).
The hot water system is filling, wait.
The cleaning cycle in not finished.
Restart the cleaning cycle.
15
To Next Page