2 2 4 R R
Operating instructions and warnings
24
PED input operation:
If=0 PED input starts the pedestrian opening (operator n.1 only)
If=1 PED input starts the closing, START input starts the opening.
Pedestrian
Separated Open/Close
Ramp rate duration
-If =0 the motor starts immediately at the selected speed
-If =1 the motor speeds up progressively until it reaches the selected speed
fast ramp
slow ramp
Unused parameter
Unused parameter
1
The default value, set by manufacturer at the factory, is written in bold and underlined.
2
Column reserved to the installer to fill in with the automation personalised parameters Table 2 Parametres
3
Inactive channel.
To Next Page
Loading...
