EasyManua.ls Logo

Dea ADVANCE - Page 35

Dea ADVANCE
164 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
24V
INPUTS CONFIGURATION
PARAMETERS
Allocation of CHANNEL 1 of remotes
Warning: the OPEN_PM and CLOSE_PM
functions are not available with the HCR
Rolling Code set (P027=1)
• 000: NONE (unused parameter)
• 001: START (start)
• 002: PEDESTRIAN (pedestrian)
• 003: OPEN (separated open)
• 004: CLOSED (separated close)
• 005: OPEN_PM (man present open)
• 006: CLOSED_PM (man present close)
• 007: ELOCK_IN (con! gurable Output 2. See P062)
• 008: AUX_IN (con! gurable Output 1. See P066)
CH1
Allocation of CHANNEL 2 of remotes CH2
Allocation of CHANNEL 3 of remotes CH3
Allocation of CHANNEL 4 of remotes CH4
Selection of type of remotes
• 000: HCS ! x-code
• 001: HCS rolling-code
• 002: Dip-switch
OPERATORS CONFIGURATION
PARAMETERS
Selection type of operators
• 000: ADVANCE
Unused parameter
Unused parameter
OPERATING PARAMETERS
Operators speed adjustment during slow-down while opening
Warning: by modifying the values of these
parameters, on exiting the programming
mode, a new learning of the motor stroke
will be requested.
15%tot........................100%tot
Operators speed adjustment during the stroke while opening 15%tot........................100%tot
Operators speed adjustment during the stroke while closing 15%tot........................100%tot
Operators speed adjustment during slow-down while closing 15%tot........................100%tot
Slow down duration adjustment while opening 0%tot............................80%tot
Slow down duration adjustment while closing 0%tot............................80%tot
Operator 1 force adjustment while opening
(if = 100% obstacle detection deactivated)
1%tot…...........................100%tot
Operator n.1 force adjustment while closing
(if = 100% obstacle detection deactivated)
1%tot…...........................100%tot
Unused parameter
Unused parameter
Automatic closing times adjustment
(if = 0 automatic closing deactivated)
0sec...................................255sec
Pedestrian automatic closing time adjustment
(se = 0 pedestrian automatic closing deactivated)
0sec...................................255sec
Pedestrian stroke duration adjustment 5%tot…...........................50%tot
Pre-" ashing time adjustment 0sec…….10sec
Unused parameter
Unused parameter

Table of Contents

Related product manuals