Need help?Do you have a question about the DEC 220240 and is the answer not in the manual?
Provides step-by-step instructions for powering the DEClaser 2200 plus printer on, including expected display readings.
Details the procedure for safely powering off the printer, emphasizing precautions to prevent data loss or paper jams.
Explains how to enable and use duplex (two-sided) printing, covering paper path and mode selection.
Details how to load standard and optional paper cassettes, including supported paper sizes and capacities.
Explains how to manually feed various print media like paper, labels, and envelopes when automatic feeding is not used or possible.
Details the procedure and special considerations for manually feeding envelopes into the printer.
Explains how to adjust the print density dial to control toner application for optimal print quality and cartridge life.
Describes how to print the engine test page to check paper feed, toner dispersion, and line weight for proper printer operation.
Guides on entering Menu Mode to select and configure printer parameters using setup menus.
Outlines the different types of memory (ROM, RAM, NVRAM) used for storing printer configuration settings.
Details NVRAM for saving configuration changes that persist after power off or reset.
Provides a practical example of changing page offset values and saving them to NVRAM via the menu system.
Explains the FEEDER menu settings for selecting paper feed modes (cassette, manual, envelope feeder).
Details the LAYOUT menu features for adjusting print position and setting automatic line wrapping.
Covers the INTERFACE menu settings for configuring parallel (Centronics) and serial (RS232C) connections.
Lists the sizes and specifications for plain paper suitable for cassette and manual feed operations.
Outlines the specifications envelopes must meet, and lists types of envelopes that cannot be used with the printer.
Explains how to acknowledge and bypass certain printer error conditions to continue printing.
Lists and explains the meaning of printer status messages displayed during operation, indicating readiness or tasks.
Details operator call messages that require intervention, such as adding paper or clearing jams, with corrective actions.
Lists software error messages and their corrective actions, including memory issues and interface problems.
Identifies service call messages indicating the need for qualified service representative assistance.
Provides solutions for common printer issues like no power, no printout, poor printing, and miscellaneous problems.
Explains common causes of paper jams and the events that occur when a jam is detected.
Details procedures for clearing paper jams from the top and rear paper tray areas of the printer.
Emphasizes keeping the printer clean to ensure optimum print quality, advising against solvents.
Details the procedure for cleaning the primary corona wire within the EP-S cartridge to prevent black streaking.
Explains how to clean the transfer corona wires and discharging pins, often done during EP-S cartridge replacement.
Offers advice on maximizing the life of the EP-S cartridge through proper care and print density settings.
Guides on replacing the EP-S cartridge when toner is low or distribution is uneven, including necessary related maintenance.
Provides instructions for replacing the disposable ozone filter, which must be changed after 100,000 pages.
To Next Page
General