DEC 220240 - Appendix A Declaser Printer Quick Reference Guide; Positioning Controls; A.1 Positioning Controls

A.1 Positioning Controls
CUU—Cursor Up
CSI Pn A
Where:
Pn = n Is the numeric value according to the Select Size Unit (SSU) sequence and
Positioning Unit Mode (PUM) setting. (A value of 0 is treated as one vertical
position up.)
DECCAHT—Clear All Horizontal Tabs
ESC 2 Clears all horizontal tab stops.
DECCAVT—Clear All Vertical Tabs
ESC 4 Clears all vertical tab stops.
DECHTS—Horizontal Tab Set
ESC 1 Sets a tab stop at the active horizontal position.
DECSHTS—Set Horizontal Tab Stops
CSI Pn ; . . . ; Pn u
Where:
Pn = n Is the number of units according to the SSU sequence and PUM setting.
DECSVTS—Set Vertical Tab Stops
CSI Pn ; . . . ; Pn v
Where:
Pn = n Is the number of units according to the SSU sequence and PUM setting.
DECVTS—Vertical Tab Set
ESC 3 Sets a tab stop at the active vertical position.
DEClaser Printer Quick Reference Guide A–3