DEC 220240 - Printing the Font List

The Font List includes internal fonts, cartridge fonts, and fonts that have
been downline loaded into memory. You can select fonts only by using
commands from the host computer; you cannot select them from the
control panel. For information about selecting fonts, refer to the Digital
ANSI-Compliant Printing Protocol Level 3 Programming Reference Manual
and the Digital ANSI-Compliant Printing Protocol Level 3 Programming
Supplement.
Use the procedure in Table 2–5 to print the font list.
Table 2–5: Printing the Font List
Operation Display Reads
1. Press
On Line
to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press
Test/Font
twice.
— The font list prints.
06 FONT LIST

00 READY
3. Press
On Line
to place the
printer back on line.
— The On Line indicator
lights.
00 READY
2–48 Operator’s Guide