A.2 Margins and Spacing
DECSHORP—Set Horizontal Pitch
CSI Ps w
Where:
Ps = 0 Is determined by current font.
Ps = 1 Is 720 centipoints (10 characters/inch).
Ps = 2 Is 600 centipoints (12 characters/inch).
Ps = 3 Is 545 centipoints (13.2 characters/inch).
Ps = 4 Is 436 centipoints (16.5 characters/inch).
Ps = 5 Is 1440 centipoints (5 characters/inch).
Ps = 6 Is 1200 centipoints (6 characters/inch).
Ps = 7 Is 1090 centipoints (6.6 characters/inch).
Ps = 8 Is 872 centipoints (8.25 characters/inch).
Ps = 9 Is 480 centipoints (15 characters/inch).
Ps = 11 Is 420 centipoints (approx. 17.1 characters/inch).
Ps = 12 Is 840 centipoints (approx. 8.55 characters/inch).
Ps = 13 Is 400 centipoints (18 characters/inch).
Ps = 14 Is 800 centipoints (9 characters/inch).
Ps = 15 Is 696 centipoints (approx. 10.3 characters/inch).
DECSLPP—Set Lines per Physical Page
CSI Pn t
Where:
Pn = 0 Sets the form length to the logical paper size.
Pn = n Is the numeric value, according to the SSU sequence and the PUM setting.
A–6 Operator’s Guide
To Next Page
Loading...