6.6.1 Incorrect Printing Mode
An incorrect printing mode error occurs when the duplex mode of operation
is incorrectly selected to print envelopes. Select the simplex mode of
operation as follows:
1. Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
2. Press
Duplex
to select the simplex mode of operation.
— The Duplex indicator shuts off.
3. Set the printout selector to the envelope/faceup print position.
4. Fold out the extension tray.
MLO-004900 (Figure 6-1; 16 picas)
5. Press
On Line
to place the printer back on line.
— The On Line indicator lights.
6–12 Operator’s Guide
To Next Page
Loading...