2.17 Resetting the Printer
There are two methods of resetting the printer:
• You can perform a hard reset by powering the printer off and then
back on.
• You can perform a soft reset by pressing
Reset
.
Perform a soft reset of the printer under the following circumstances:
• When changing paper cassette sizes
• To clear data in the print buffer
• To invoke features in the INITIAL menu
• To enter and exit Control Representation Mode
Use the procedure in Table 2–7 to perform a soft reset.
Table 2–7: Resetting the Printer
Operation Display Reads
1. Press
On Line
to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press and hold
Reset
for about
3 seconds.
03 RESET
00 READY
3. Press
On Line
to place the
printer back on line.
— The On Line indicator
lights.
00 READY
2–50 Operator’s Guide
To Next Page
Loading...