Table 4–17 (Cont.): INTERFACE Menu Features and Values
Feature Values Description
8ES 8 data bits
Even parity check
1 stop bit
8OS 8 data bits
Odd parity check
1 stop bit
7ESS 7 data bits
Even parity check
2 stop bits
7OSS 7 data bits
Odd parity check
2 stop bits
7ES 7 data bits
Even parity check
1 stop bit
7OS 7 data bits
Odd parity check
1 stop bit
8SS 8 data bits
No parity check
2 stop bits
dtr
2
Fix-H
1
Sets the DTR line to a fixed high signal.
Ready-H Sets the DTR line to a high signal when
the printer is ready to receive data.
xon/xoff
2
ON
1
Enables buffer overflow control.
OFF Disables buffer overflow control.
etx/ack
2
OFF
1
Disables buffer overflow control.
ON Enables buffer overflow control.
NOTE: Etx/ack is not supported on Digital
systems.
1
Factory default setting.
2
Available only when RS232C is selected.
Printer Configuration 4–29
To Next Page
Loading...