DECLFF—Load Font File
DCS Ps1 ; Ps2 ; Ps3 y font_record, font_record; comment_record ST
Where:
Ps1 = 0 Is Digital font file format.
Ps2 = 0 Is print the summary sheet.
Ps2 = 1 Is do not print the summary sheet.
Ps2 = 2 Is send font error and warning information.
Ps2 = 3 Is print the summary sheet and send font error and warning information.
Ps2 = 4 Is print font error and warning information.
Ps3 = 0 Is delete all fonts.
Ps3 = 1 Is replace loaded font files with same ID as loaded font file.
LS1R—Locking Shift 1 Right
ESC ~ G1 becomes the active GR character set.
LS2—Locking Shift 2
ESC n G2 becomes the active GL character set.
LS2R—Locking Shift 2 Right
ESC } G2 becomes the active GR character set.
LS3—Locking Shift 3
ESC o G3 becomes the active GL character set.
LS3R—Locking Shift 3 Right
ESC | G3 becomes the active GR character set.
A–16 Operator’s Guide
To Next Page
Loading...