DECVEC—Draw Vector
CSI Ps1 ; Pn2 ; Pn3 ; Pn4 ; Pn5 ! |
Where:
Ps1 = 0 Draws horizontal line (X).
Ps1 = 1 Draws vertical line (Y).
Ps1 = Other Performs no action.
Pn2 = n Is the horizontal line (X) start position according to the SSU sequence.
Pn3 = n Is the verical line (Y) start position according to the SSU sequence.
Pn4 = n Is line length according to the SSU sequence.
Pn5 = n Is line width according to the SSU sequence.
DSR—Device Status Request
CSI Ps n
Where:
Ps = 0 or 5 Sends an extended status report.
Ps = 6 Sends a cursor position report.
Ps = ?1 Disables all unsolicited status reports.
Ps = ?2 Enables brief unsolicited status reports, sends extended status report.
Ps = ?3 Enables extended unsolicited status report, sends extended status report.
JFY—Justify
CSI Ps SP F
Where:
Ps = 0 Stops text justification.
Ps = 2 Justifies text with limits.
Ps = ?2 Justifies text without limits.
A–26 Operator’s Guide
To Next Page
Loading...