DEC 4000 Model 200 - Successful Power-Up to List of Bootable Devices

Figure 2–4: Successful Power-Up to List of Bootable Devices
KA660-A Vn.n VMB n.n
Performing normal system tests.
95..94..93..92..91..90..89..88..87..86..85..84..83..82..81..80..
79..78..77..76..75..74..73..72..71..70..69..68..67..66..65..64..
63..62..61..60..59..58..57..56..55..54..53..52..51..50..49..48..
47..46..45..44..43..42..41..40..39..38..37..36..35..34..33..32..
31..30..29..28..27..26..25..24..23..22..21..20..19..18..17..16..
15..14..13..12..11..10..09..08..07..06..05..04..03..
Tests completed.
Loading system software.
No default boot device has been specified.
Available devices.
-DIA0 (RF72)
-DIA1 (RF72)
-MUA0 (TK70)
-EZA0 (08-00-2B-06-10-42)
Device? [EZA0]:
To select a boot device, enter a device name at the system prompt. When you
have selected a boot device, the system boots from that device. Figure 2–5
shows a successful power-up when DIA0 has been selected as the boot
device. The next time the system is turned on, it will autoboot from the
device you have just selected.
NOTE: If you do not enter a device name within 30 seconds, the system
attempts to boot from the Ethernet device, EZA0.
2–8 VAX 4000 Model 200 (BA430) Operation