DEC 4000 Model 200 - System Software; Inserting a Cassette Tape into the Drive

Figure 3–15: Inserting a Cassette Tape into the Drive
Digital
Data
Storage
MLO-005331
This fig. was rotated with QA trilb
3.1.4.4 System Software
System software allows you to execute commands to read and write data to
the cassette tape. Your operating system documentation describes specific
commands that allow you to do the following:
• Back up data from disk drives to a tape drive
• Copy data from disk to tape or tape to disk
Operating the System Options 3–35