3.1.6 RRD40-Series Compact Disc Drive Subsystem
If your system includes an RRD40-series Compact Disc Drive Subsystem,
refer to its user’s guide for instructions on operating the device.
3.1.7 TSV05 Tape Drive
If your system includes a TSV05 tape drive, refer to the TSV05 Tape
Transport System User’s Guide for instructions on how to operate the device.
NOTE: The TSV05 is a data interchange device and is not supported as a
backup device.
3.1.8 TSZ07 Tape Drive
If your system includes a TSZ07 tape drive, refer to the TSZ07 subsystem
user’s guide for instructions on how to operate the device.
3.1.9 TU81E Tape Drive
If your system includes a TU81E tape drive, refer to the TU81–Plus Tape
Subsystem User’s Guide for instructions on how to operate the device.
3.2 Communications Controller Options
The following types of communications controllers are available for the VAX
4000 systems:
• Asynchronous serial controllers (with or without modem support)
• Synchronous serial controllers (with or without modem support)
• Network controllers
3.2.1 Asynchronous Serial Controllers
The following asynchronous controllers are available for your VAX 4000
system, with and without modem support:
• CXA16—16-line multiplexer, Q-bus controller
• CXB16—16-line multiplexer
• CXY08—8-line multiplexer with modem control, Q-bus controller
• DFA01—2-line controller with integral modems, Q-bus controller
• DSRVB—8-line terminal server, Ethernet device
3–38 VAX 4000 Model 200 (BA430) Operation
To Next Page
Loading...