DEC 4000 Model 200 - RF-Series ISE Controls and Indicators

Figure 3–1: RF-Series ISE Controls and Indicators
Write-Protect Button
Run/Ready Button
Bus Node
ID Plug
Fault Indicator
MLO-004044
Each ISE has the following controls and indicators on its front panel:
• Bus node ID plug
• Fault indicator
• Write-Protect button
• Run/Ready button
Bus node ID plugs identify the bus node number of the ISEs to the system,
as well as the unit number by default. Bus node numbers are configured
at the factory in consecutive order from right to left. Tapeless systems can
have up to four ISEs, with the rightmost ISE as 0 and the leftmost ISE as
3.
Table 3–1 lists RF-series controls and indicators.
Operating the System Options 3–3