35
- Frying under the appliance shall be done under constant su-
pervision as overheated oils and fats may ignite.
- Respect the guidelines for the cleaning and replacement of
grease lters. Accumulated grease deposits represent a re
risk.
- The use of the appliance over ames produced by fuels (wood
or coal) is not allowed.
WARNING:
Place the metal box containing the electrical components at
minimum distance of 65 cm from the gas hob, in any case at
65 cm from the hood suction area.
WARNING:
We recommend to place the metal box containing the electrical
components at a distance of at least 10 cm from the ground
and at a safe and proper distance from any heat source (e.g.
oven or hob side).
INSTALLING THE HOOD
Installation shall be performed in compliance with any applicable standards on the
ventilation of enclosed spaces. In France, these requirements are specied in DTU
61.1 issued by CSTB.
In particular, the air collected shall not be conveyed into any existing ventilation sy-
stem which is being used for any other purpose such as discharging exhaust fumes
from appliances burning gas or other fuels . The use of disused ducts is not allowed,
except upon approval by a qualied technician.
To Next Page
Loading...
