Deep Sea Electronics Plc DSE892 SNMP - Reboot Now

Connecting to the Gateway Management Pages
057-179 ISSUE: 3
Page 32 of 50
7.2.6.3 REBOOT NOW
Some operations require the gateway to be rebooted (restarted).
Examples of this are :
 Changes to the DSE892 Username or Security Code
 Changes to the IP Setup or SNMP Setup
Where this is required, the message Please Reboot to Apply Changes appears under the navigation
menu as shown to the left.
Press Reboot Now to restart the device.
The PC screen shows a progress bar as this process is undertaken.