DEEPBLU cosmiq+ - SECTION 4 - OVERVIEW; 4.1 OPERATING MODES; 4.2 BATTERY AND CHARGING

11
BACK TO INDEX
SECTION 4 – OVERVIEW
4.1 OPERATING MODES
The functions of the COSMIQ
+
Dive Computer are organized into 6 operating modes. You can
always tell which mode COSMIQ
+
is in by looking at the icon indicator at the top of the screen.
COSMIQ
+
Operating Modes
• Watch Mode: The default mode for COSMIQ
+
. Time and date are displayed along with the
battery level indicator. COSMIQ
+
will enter Standby after 20 seconds of inactivity in Watch
Mode. The Dive Plan function can be accessed from this mode.
• Scuba Mode: COSMIQ
+
measures current depth, dive time, water temperature and performs
all decompression calculations. It also monitors ascent rate and determines required stop
times. COSMIQ
+
monitors CNS oxygen toxicity and initiates visual and audible alarms to warn
of potentially dangerous situations. Divers can pre-set the oxygen level between 21% and 40%
and set a depth and/or time alarm.
• Bottom Timer Mode: COSMIQ
+
acts as a gauge and timer ONLY. It will not perform any
calculations related to decompression, saturation or desaturation. COSMIQ
+
also keeps
track of your average depth and displays a secondary dive time, both of which can be reset
by pressing the ADJUST button. Scuba Mode will be locked for 24 hours after a dive in
Bottom Timer Mode. Note that this mode is not available in the original COSMIQ model that
preceded the COSMIQ
+
.
• Freedive Mode: COSMIQ
+
measures current depth, dive time and water temperature.
Freedivers can set a Max Depth and/or Max Time alarm.
• Log Mode: Gives access to dive data from previous dives. Maximum depth, dive time, water
temperature, run time, date and the number of the dive are all shown for each saved dive.
• Sync Mode: Use this mode to upload dive data from COSMIQ
+
to the Deepblu app via Blue-
tooth. The rmware version that your COSMIQ
+
is running is indicated in the bottom right
corner of the screen.
4.2 BATTERY AND CHARGING
COSMIQ
+
has a lithium-ion battery that is rechargeable using the magnetic USB connector, which is
compatible with all standard USB inputs.
Charge COSMIQ
+
before using it. To charge COSMIQ
+
, connect the magnetic USB cable with the
gold-plated contact points on the bottom of COSMIQ
+
and plug the USB charging cable into any
standard USB port. Check the screen to ensure that the battery indicator is running on the battery
icon. COSMIQ
+
will enter into Standby during the charge period, but it will continue charging.
COSMIQ
+
displays a battery power indicator that allows you to track the amount of battery power at
all times and to give you advance warning of an impending need to charge the battery. The battery
power indicator is visible in the top right hand corner of COSMIQ
+
’s display screen in all modes
except for Standby.
SECTION 4 – OVERVIEW