DEEPBLU cosmiq+ - 4.6 SETTINGS ADJUSTABLE FROM COSMIQ+

15
BACK TO INDEX
• Time Alarm: Set an alarm to sound once you reach a certain dive time. You can set the Time
Alarm between 10 minutes and 2 hours. The default Time Alarm is 1 hour.
• Depth Alarm: Set an alarm to sound once you reach a certain depth. You can set the Depth
Alarm between 5 meters/16 feet and 50 meters/165 feet. The default Depth Alarm is 40
meters/131 feet.
Freedive Mode
• Max Time Alarm: Set an alarm to sound once you reach a certain dive time. The Max Time
Alarm can be set from 30 seconds to 3 minutes. The default is set at 1 minute and 30 seconds.
This setting can also be adjusted manually using COSMIQ
+
.
• Max Depth Alarm: Set an alarm to sound once you reach a certain depth. The Max Depth
alarm can be set from 15 meters/50 feet to 80 meters/265 feet. The default is 15 meters/50
feet. This setting can also be adjusted manually using COSMIQ
+
.
Choose all of your preferred settings while COSMIQ
+
is in Sync Mode and they will be
automatically uploaded to COSMIQ
+
. Once the sync is complete, COSMIQ
+
is ready to use.
4.6 SETTINGS ADJUSTABLE FROM COSMIQ
+
Most settings for COSMIQ
+
can only be adjusted using the Deepblu mobile app. Only a limited
number of settings can be adjusted directly from COSMIQ
+
. The following settings can be changed
manually using COSMIQ
+
:
Scuba Mode
• Oxygen level (21% to 40%).
Freedive Mode
• Max Depth Alarm (15 meters/50 feet to 50 meters/165 feet).
• Max Time Alarm (30 seconds to 3 minutes).
To change the above settings, use the MODE button to cycle to the correct operating mode. Press
the ADJUST button repeatedly to adjust the settings. Press the MODE button to save your preferred
settings.
In addition to changing the above settings, the ADJUST button can be used to access the following
functions:
Watch Mode
• Dive Plan function—access projected depth and no-decompression limit for an upcoming dive.
Log Mode
• Toggle between saved dive logs.
To access the Dive Plan and Dive Log functions, use the MODE button to toggle to the correct
operating mode. Use the ADJUST button repeatedly to cycle through items within the mode. Press
the MODE button to exit.
Please see below (Section 5) for a detailed description of each mode, and instructions for adjusting
the settings within the various modes.
SECTION 4 – OVERVIEW