-09-
8.0 CHARGING
USB Adapter
(5V/2.0A)
Power Bank
Before charging, please check the contents of the “ Use of Battery”
section of the “ Safety Guidelines” carefully!
1) When the drone battery runs low, the indicator lights on the drone will
flash continuously.
2) Remove the battery and connect the USB charging cable to the battery.
3) Plug the USB charging cable into a USB charging port on power bank
or USB adapter (5V/2.0A ).
4) The red indicator light on the battery will turn on when the battery is
charging, and will turn green when the battery is fully charged.
5) Charging time: about 90 minutes.
To Next Page
Loading...
