-14-
10.3 Pairing
② Place the drone on a flat and level
surface with the head forward and
the tail towards the pilot.
① Press and hold the power button
to turn on the drone and the
indicator lights on the drone begins
to flash.
④ Push the left joystick up then down
to pair the drone with the transmitter.
The indicator lights on the drone and
the transmitter will turn solid if the
drone is paired successfully.
③ Press the power button on the
transmitter to turn it on and you will
hear “Di Di”, then the indicator light
on the transmitter will flash.
HEAD
·All of the following operations on this manual takes MODE 2 for
example.
To Next Page
Loading...
