-15-
② Place the drone on a flat and level
surface with the head forward and
the tail towards the pilot.
10.3 Pairing
① Press and hold the Power Button
for 3 seconds to turn on the drone
and the indicator lights on the drone
begins to flash.
④ Push the left joystick up then
down to pair the drone with the
transmitter. The indicator lights on the
drone and transmitter will turn solid if
the drone is paired successfully.
③ Long press the Power Button
( ) on the transmitter to turn it on
and you will hear “Di”, then the
indicator light on the transmitter
begins to flash.
HEAD
TAIL
Power
Button
H
E
A
D
All of the operations shown in this manual are demonstrated using
MODE 2.
To Next Page
Loading...
