-21-
11.6 Headless Mode
Please make sure the pilot to stay in the same orientation
as the drone head faces when the drone is pairing.
HEAD
TAIL
TAIL
TAIL
HEAD
HEAD
1. After pairing/calibration, long press the the Headless Mode button ( )
on the transmitter to enter the Headless Mode. The indicator lights on the
drone continue to flash to indicate that it is in Headless Mode.
2. Press the Headless Mode button again, and you will hear a beep, the
indicator lights on the drone will turn solid which indicates the drone exits
the Headless Mode.
While in Headless Mode, pushing the direction joystick forward will make it
fly in the direction that the head of the drone faces when the drone is
pairing. To make sure the pilot can tell drone's direction, during the flight,
we recommend that pilot stays facing the same direction that the drone
head faces at pairing. By doing so it is ensured that when the pilot pushes
the direction joystick forward/backward, the drone will fly forward/backward
toward him/her. If the pilot moves the direction joystick left/right, the drone
will move left/right relative to him/her.
To Next Page
Loading...
