32
3.1 Flight Functions >>
DRONE FUNCTIONS / 3
* RA: the Return Altitude set in the app setting. (The default RA is 66 ft.)
The Return to Home
(RTH) function brings the drone back to the recorded Home
Point. This function can only be triggered when the drone is in GPS mode.
The drone's default home point is the location where it first receives a strong GPS
signal (When this occurs, the satellite connection count shown by the GPS signal icon
( ) on the LCD Screen is "8" or higher). The drone will record its takeoff position at
that moment as the home point. During flight, if the drone lands at a new location, the
position of the next takeoff will become the newly recorded home point.
Smart RTH:
When the GPS signal is strong (satellite connections ≥ 8) and the Home point is
recorded previously, press the button. T
he LCD screen displays "RTH MODE", indicating
that the Smart RTH is activated. The drone will start flying back to the Home Point
automatically.
During the RTH procedure, if the pilot presses the button,
the LCD screen displays "EXIT
RTH",
the drone will exit the RTH procedure immediately.
1
Failsafe RTH:
2
Return to Home(RTH)
The Failsafe RTH will be activated when:
To Next Page
