33
3.1 Flight Functions >>
3 / DRONE FUNCTIONS
Return to Home(RTH)
1. The drone receives a strong GPS signal (satellite connections ≥ 8); and
2. There is a pre-recorded Home Point; and
3. The connection between the transmitter and the drone is lost for more than 6 seconds.
4. The compass has no interference.
Once the Failsafe RTH is activated, the indicator on the drone will continuously flash and
the transmitter keeps beeping. the drone will start to to fly back to the pre-recorded
Home Point automatically. If the connection between the drone and the transmitter is
re-established during the Failsafe RTH procedure, you can exit the RTH manually.
H=RA
H＜RA
H＞RA
Home
Point
The following are two possible returning procedures
for Smart RTH and Failsafe RTH:
Flight altitude≥RA：When the drone’ s current
altitude is higher than or equal to RA, the drone will
maintain its current altitude, fly back above the Home
Point, then descend to the ground.
a
Flight altitude＜RA：When the drone’ s current
altitude is lower than RA, the drone will first ascend to
RA, fly back above the Home Point, then descend to
the ground.
b
To Next Page
