DeFelsko PosiTector Series User Manual

Management Procedure 2585 Rev. F
6
Management Procedure Change Notice
Procedure Number: MP 2585
Revision Level: F
Date of Change: June 10 , 2019
Title: Calibration Procedure for PosiTector UTG, UTG STD,
UTG-C, UTG-CA, UTG-CLF, UTG-CX, UTG-M, UTG-
ME & UTG-P
Reason for Change:
• New products
Description of Change:
• Updated Table 1-1
• Retitled and updated tables 2-1, 2-2 & 2-3
• Re-wrote section 2
• Re-wrote Sections 1.1 and 3.2.2.
• Added section 3.2.3
• Updated calculations in table 5
I confirm I have read and understand the procedure and the change described above.
Printed Name Signature Date
Management Form 0010.02-05/1998

DeFelsko PosiTector Series Specifications

General

Data Logging	Yes
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Connectivity	USB, Bluetooth
Calibration	Automatic or manual
Type	Coating thickness gauge
Measurement Principle	Magnetic Induction, Eddy Current, Ultrasonic
Units	mils, microns, inches
PC Interface	USB
Power Source	Rechargeable battery
Standards	ASTM D7091, SSPC-PA 2