DeFelsko PosiTector - Updates

9
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart is
enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected batches to the PosiTector App. Only readings and
batches that have yet to be synchronized with any smart device
are synchronized automatically.
The Gage will perform a Hard Reset after an
update (pg. 5). All stored measurements will be erased from
memory.
Updates
Determine if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
When Enabled , allows communication with a smart device
running the PosiTector App (see Accessing Stored Measurement
Data, pg. 7) via auto-pairing Bluetooth Smart (BLE) wireless
technology.
Bluetooth Smart
(Advanced models only, serial numbers 784000 and greater)
PosiSoft Desktop is required when using USB
connections to synchronize measurements with PosiSoft.net.
NOTE:
Send Batches
Transfers selected batches to the PosiTector App (useful
when switching between devices).
The send batches option is visible in the menu when the Gage is
connected to a smart device running the PosiTector App.
If Bluetooth Smart is disabled, data from batches
selected in the Sync Batches menu are held in a queue until
communication with the PosiTector App is re-established.
NOTE: