Page 16
4 Preparation
Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to
save energy:
• Use dark coloured or enamel coated
cookware in the oven for better heat
transmission.
• Before cooking your dishes, perform a
preheating operation if it is advised in
the user manual or cooking
instructions.
• Do not open the door of the oven
frequently during cooking.
• Try to cook more than one dish in the
oven at the same time whenever
possible. Two cooking vessels can be
placed onto the wire shelf.
• Cook more than one dish one after
another. The oven will already be hot.
• Save energy by switching off your oven
a few minutes before the end of the
cooking time. Do not open the oven
door.
• Defrost frozen dishes before cooking
them.
• Use pots and pans with covers for
cooking. If there is no cover, energy
consumption may increase by 4 times.
• Select the burner which is suitable for
the bottom size of the pot that is to be
used. Always select the correct pot size
for your dishes. Larger pots require
more energy.
Initial use
Time setting
Before using the oven the clock
time must be set. If the clock time
is not set, the main oven will not
work.
While making any adjustment,
related symbols on the clock will
flash.
Press '–' or '+' (5/6) keys to set the time after
the oven is energized for the first time
If the current time is not set, time
setting will start increasing/
moving up from the 12:00. clock
symbol. '9' will be displayed to
indicate that the current time has
not been set. This symbol will
disappear once the time is set.
Time settings are cancelled in
case of a power failure and will
need to be reset.
Changing the time
To change the time that has been previously
set:
1. Press (11) key to activate current time
symbol '9'.
2. Press '–' or '+' (5/6) keys to set the current
time.
1 Program key
2 Cooking time
3 End of cooking time
4 Alarm
5 Minus key
6 Plus key
7 Screen brightness setting
8 Alarm volume
9 Current time
10 Keylock
11 Adjustment key
After setting the time, cooking can be started
or ended by selecting the desired position
with the temperature button and the function
button.
To Next Page
Loading...
