Page 4
The manufacturer strives for continuous improvement. Fo
r this reason, the text and
illustrations in this manual are subject to change without notice.
Figures in this manual are schematic and may not exactly match your product.
Values stated on the product labels or in the documentation accompanying it are
obtained in laboratory conditions in accordance with relevant standards. Depending
on operational and environmental conditions of the product, these values may vary.
Model
DHD494 SLIMLINE HOB TC
Volts 220V –240V 50/60Hz~
Amperes 27.83A
Plate power rating (ø, mm/ W)
Front right vitroceramic plate 140 mm Vitroceramic Plate 1200 W
Back right vitroceramic plate 180 mm Vitroceramic Plate 1800 W
Back left dual zone vitroceramic plate 210 mm Vitroceramic Plate 750/2200 W
Total power ( W) 6400 W
Type of switch Electronic sensors
Width
Depth
580 mm
510 mm
Cable type H07RN-F 3G6
Cable length 2 M
Front left vitroceramic plate 140 mm Vitroceramic Plate 1200 W
Technical Specifications
1
To Next Page
Loading...
Need help?
General
