DeLaval SCB3 - 2 Transporting the Brush; 3.1 Installing the Brush on a Wall

2 Transporting the brush
The brush is packed in a box and mounted on a
pallet to be secured during transport. For safety
reasons, three protection plates are mounted to
the unit during transport, see Fig. 8.
The weight of the brush including pallets is
85 kg (the brush alone: 70 kg).
Use an elevator to move and lift the unit. Use the
pre-mounted hook.
Note! The protection plates (A) should be kept
during installation but removed before turning on
the brush.
Note! Unscrew the brush from the wooden trans-
port pallet after the transport.
3 Installing the brush
3.1 Installing the brush on a wall
Note! The wall must be sufficiently strong. It
should be comparable with a reinforced concrete
wall.
A
A
A
215121
Fig. 8: SCB3 packed for transport.
A: The protection plates
DeLaval swinging cow brush SCB3
Installation
© DeLaval 2016.
2016-07-19, Version 5 15 (26) 84948801