Operator's maintenance
DeLaval swinging cow brush SCB3
Note! Follow the safety precautions during main-
tenance work.
Note! Maintenance tasks can be executed only
by an authorized person.
1 Foreword
n Turn the switch to the OFF position before
starting any maintenance work. For addi-
tional safety, disconnect the plug from the
wall socket and remove the fuse from the
main switchboard.
n Clean the DeLaval swinging cow brush SCB3
carefully before starting maintenance.
n Always contact a DeLaval service technician
in case of any doubts.
n The following maintenance instructions are
based on normal use, when 60 cows have
free access to the brush.
2 Maintenance tasks
No Operator's maintenance task Frequency Max. interval Replacement
parts or kits
1 Checking the gearbox for oil leakage. - Monthly
2 Cleaning the brush cylinder - Every second
month
3 Replacing the brush cylinder - Yearly
No 1 Checking the gearbox for oil leakage.
1. Check the gearbox for oil leakage.
2. In case of leakage, contact the DeLaval
service technician.
Frequency -
Max. interval Monthly
Estimated time: -
Service type:
DeLaval swinging cow brush SCB3
Operator's maintenance
© DeLaval 2016.
2016-07-19, Version 5 21 (26) 84948801
To Next Page
Loading...